Abstract
Signal generators are widely used in experimental courses of universities. However, most of the commercial tests signal generators are expensive and bulky. In addition, a majority of them are in a fixed working mode with many little-used signals. In order to improve this situation, a small sized and highly accurate economic signal generator based on DDS technology has been developed, which is capable of providing wave signals commonly used in experiments. Firstly, it is introduced the basic principles of DDS and is determined the overall scheme of the signal generator. Then, it proposes a design of the hardware, which include power supply module, display module, keyboard module, waveform generating module based on DDS chip, and the minimum system module based on C8051F010. The signal generator was designed to output sine and square waveforms, and the other achieved performances included the frequency range 0.1 Hz–12.5 MHz, the frequency resolution 0.05 Hz–0.1 Hz, the output amplitude 1.0–4.5 V, the frequency accuracyKfmin=94.12% andKfmax=99.99%, and the signal distortionRTHDmin=0.638% andRTHDmax=11.67%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
