Abstract
In this study, a two-level scanning strategy for a noncontact laser ultrasonic measurement system is proposed to expedite the inspection of a wind turbine blade. First, coarse scanning of the entire blade is performed with a low spatial resolution for initial delamination localisation. Then, dense scanning with a high spatial resolution is performed only within the identified delaminated region for delamination visualization. This study especially focuses on the initial delamination localisation using adaptive coarse scanning. Laser ultrasonic responses from two pitch-catch paths, names inspection pairs, are obtained within a specified coarse scanning grid. Then, potential delamination locations within the given grid are estimated through time-of-flight analysis of delamination reflected waves. Once potential delamination locations are estimated, new inspection pairs are placed near the potential locations for precise localisation. These steps are repeated for every coarse scanning grids on the target wind turbine blade. The feasibility of the proposed technique for rapid delamination detection is demonstrated with a 10 kW glass fibre reinforced plastic wind turbine blade.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
