Decreasing Fe0 and Fe3O4 nano particle size by simultaneous synthesis on a bio-polymeric structure: Kinetic study to remove Amaranth from aqueous solution

Abstract

Fe0 and Fe3O4 nano-particles (FFNPs) were synthesized, simultaneously, and stabilized by the cross-linked pectin with adipic acid (CPA) to obtain FFNPs–CPA with the ability of Amaranth (AM) removal. Fe0 and Fe3O4 nano-particles in FFNPs–CPA had a smaller average size than one, when used to connect CPA, separately. About 73% of nano-particles in Fe0NPs–CPA and 85% of nano-particles in Fe3O4NPs–CPA had the size of 25 to 45nm and 17 to 47nm, respectively, while about 100% of nano-particles in FFNPs–CPA had the size 5 to 24nm. These results showed that the simultaneous presence of Fe0 and Fe3O4 nano-particles in the synthesis process reduces the crystal growth of nano-particles. The removal percent of AM was determined 89.1 and 81.3 by Fe0NPs–CPA and Fe3O4NPs–CPA, respectively, for a dye initial concentration of 150ppm, while it was determined 98.2 by FFNPs–CPA. The removal of Amaranth by the pointed agents was as the first and second-order kinetic model for 0–8 and 8–80min, respectively.