Abstract
A conversion of shortwave to longwave radiation heat transfer in building envelope system represents an substantial part in low-energy design campaing. For that reason, an experimental test sample of a novel solar façade element based on a Transparent Insulation Material (TIM) with a selective and a nonselective absorber was developed. The investigated element is a part of an opaque lightweight structure of a building envelope. The capability of one widely used Building Energy Simulation (BES) tool is analyzed in terms of its ability to model the performance of the TIM façade element. The good consistency between the simulation results and the experimental data obtained specifically via cooling period indicates that the reference simulation model based on high emisivity of solar absorber was reliable when predicting the energy performance of TIM based façade models. However, the low emissivity of solar absorbers in the façade cavity gives rise significant limitations. They were identified concerning the BES calculation methods and modeling principles. The computational results are significantly underestimated in case of low emissivity internal surface. The methodology developed in this study is expected to provide a reference for simulating the thermal and energy performance of TIM-based building elements with different solar absorbers.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call