Abstract
Several attempts are being made to avoid the use of mercury-bearing zinc/zinc alloys as anodes in alkaline power sources. The work presented here suggests the possible use of some ternary alloys based on zinc of purity 99.9 to 99.95 wt.% as anodes in 10 M NaOH solution with sodium citrate, sodium stannate and calcium oxide as complexing agents and inhibitors. The corrosion of zinc and its alloys in 10 M NaOH solution is under cathodic control; in other alkaline electrolytes, it is under anodic control. Anode efficiency of up to 99.0% is achieved. The corrosion rates of zinc and its alloys are found to be comparable with those of mercury-bearing zinc in the chosen electrolytes. It is concluded that both dry cells and Zn-air batteries can be constructed with the above anodes and alkaline electrolytes. Thus, the presence of mercury, either in the anode or in the electrolyte, is avoided.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call