Correlation analysis between pattern and non-pattern wafer for characterization of shallow trench isolation–chemical–mechanical polishing (STI–CMP) process

Abstract

This study is about control of oxide removal amounts on the shallow trench isolation (STI) patterned wafers using removal rate and thickness of blanket (non-patterned) wafers. At first, the removal properties of plasma enhanced tetra-ethyl ortho-silicate (PETEOS) blanket wafers was investigated, and then it was compared with the removal properties and the planarization (step height) as a function of polishing time of the specific STI patterned wafers. We found that there is a relationship between the amount of oxide removal by blanket and patterned wafers. We analyzed this relationship, and the post-CMP thickness of patterned wafers could be controlled by removal rate and removal target thickness of blanket wafers. As the result of correlation analysis, we confirmed that there was the strong correlation between patterned and blanket wafers (correlation factor: 0.7109). So, we could confirm the repeatability as applying to STI CMP process from the linear formula obtained.