Abstract
In this paper, we describe a method for detecting and correcting in-plane bulk translational motion in multislice spin-echo imaging using self-calibration and postprocessing. A constant phase encoding offset between slices is used to evenly spread out the low spatial frequency echoes to allow accurate motion detection by self-calibration. Motion detection in both x and y directions is achieved by interchanging the readout and phase encoding directions for the alternate slices. Displacements are determined by cross correlating the modulus of each 1D transformed echo with a reference box car function whose width equals that of the imaged object. In addition, phase errors induced by the velocity in the readout direction are estimated and corrected using the displacement data. The results obtained from knee studies at 0.5 T and 1.5 T show that the artifacts due to translational motions are significantly suppressed upon correction. The method does not require any additional pulses or time, and the data processing can be easily implemented.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.