Abstract
Waste printed circuit boards (WPCBs) encompass abundant metals (gold, silver, and copper), along with other harmful materials including brominated epoxy resins, plastics, and heavy metals (lead, mercury, and cadmium). Direct burning and landfilling of WPCBs may cause severe health issues and impair the environment. Therefore, sustainable treatment of WPCBs is necessary to recover valuable metals and remove hazardous materials before disposal. The present work investigates the separation of copper-rich metallic fractions from the WPCBs by the combination of hammer milling and ultrasonic irradiation. Initially, discarded mobile phone PCBs are pre-processed and shortened into 1 × 1 cm2. Downscaled WPCBs are fed into the hammer mill to obtain the fine ground powder. The Powdered WPCBs are further processed through ultrasonic treatment to acquire metal-rich fraction. XRD, SEM-EDS, and ICP/AAS analysis revealed that the current technique can efficiently separate the metal-rich fraction without using toxic solvents. Results show the enhancement of copper fraction from 42.73 to 87 wt. % after ultrasonic treatment of WPCBs ground powder. Further, nitric acid leaching has been implemented to metal-rich fractions, and the parameters have been optimized for copper leaching with the assistance of response surface methodology (RSM) of the design of experiments (DOE). Quantitative dissolution (98.96%) of copper occurred using 3.5M nitric acid within 3h at 30°C with 50 GPL pulp density and 500rpm agitation speed. Finally, the kinetics of the leaching process were studied to conform the kinetics model. Moreover, the activation energy for diffusion (19.075kJ/mole) and reaction kinetics model (13.29kJ/mole) has also been calculated. The low energy consumption due to room temperature pre-treatment and effective leaching ensures the industrial feasibility of the proposed process.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Environmental science and pollution research international
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
