Controlling the orientations of directional sputtered non- and semi-polar GaN/AlN layers

Abstract

We have studied the impact on the surface orientation of different sputtered Al layers followed by AlN layers sputtered on m-plane sapphire. These initial layers were then overgrown by AlN and followed by GaN using metal-organic vapor phase epitaxy (MOVPE). By increasing sputtering time of the initial Al layer from 0 s to 15 s, we obtained single phase (10-10), (10-13) and (10-14) GaN/AlN layers. The thickness of the initial Al layer was estimated by optical transmission measurements to be about 0.5–1 nm for the (10-13) orientation, and >1 nm for the (10-14) orientation. After MOVPE growth, no trace of metallic Al was found by transmission electron microscopy, indicating that this layer was fully converted to AlN.