Control of interfacial adhesion in continuous carbon and kevlar fiber reinforced polymer composites

Abstract

Carbon fiber surfaces were treated by cold plasmas of oxygen, nitrogen, argon, ammonia, and propylene. A two-component bismaleimide, an epoxy, and a model thermoplastic resin polypropylene were used as the matrices for composites. The effectiveness of various plasmas in improving the interfacial adhesion between carbon fibers and matrix resins was demonstrated. Predominant adhesion promotion mechanisms as influenced by various plasma treatments were determined. Oxygen and argon plasmas were found to promote mechanical keying by increasing the level of fiber surface roughness and porosity. The wettability of carbon fiber surface by the matrix resin was also enhanced by oxygen plasmas and argon plasmas (to a lesser extent), as evidenced by the increased total surface energies and their polar components. These surface energy increases are mainly due to the various oxygen-containing functional groups observed on the oxygen plasma-treated surface. For the cases of ammonia and combined ammonia/argon plasma treatments, possible chemical bonding between bismaleimide and the plasma-deposited amine groups is one important promoter of interfacial bonding. In these cases increased wettability was also observed. Ammonia and ammonia/argon plasmas appear to be the more appropriate treatments for carbon-fiber/thermoset resin composites considering that they generally do not induce any appreciable reduction in fiber strength. In contrast, excessively prolonged exposure of carbon fibers to oxygen, nitrogen or argon plasma could lead to a significant reduction in fiber strength. The plasma-polymerized polypropylene deposited on the fiber surface was capable of improving the compatibility and adhesion between the fiber and the polypropylene matrix.