Abstract
In this paper, we report contact resistance analysis between inkjet-printed silver source-drain (S/D) electrodes and organic semiconductor layer in bottom-contact organic thin-film transistors (OTFTs) using transmission line method (TLM). Inkjet-printed silver electrodes, spin-coated PVP and evaporated pentacene were used as gate and S/D electrodes, gate dielectric layer and semiconductor layer, respectively. On a common gate electrode, S/D electrodes with various channel length from 15 to 111 μm were printed for TLM analysis. The same bottom-contact OTFT with evaporated silver S/D electrodes was also fabricated for reference. We extracted contact resistances of 1.79 MΩ·cm and 0.55 MΩ·cm for inkjet-printed and evaporated silver electrodes, respectively. Higher contact resistance for inkjet-printed silver electrodes can be explained in terms of their relatively poor surface properties at electrode edge that can cause small pentacene molecule grain or slight oxidation of surface during the printed silver sintering process.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
