Abstract
In order to predict the correlation among the processing parameters, microstructures, and mechanical properties for additive manufacturing, a computational framework integrating discrete element method, phase-field simulation, crystal plasticity finite element method, and extreme value statistics is proposed. The framework is applied to reveal the influence of laser scanning velocity on the microstructure evolution, yield stress, fatigue indicator parameter (FIP) distribution, and fatigue dispersity, in order to show its capability in simulating additive manufacturing process and the resultant mechanical properties. Firstly, discrete element method simulations are carried out to spread the powder bed layer by layer with the consideration of powder size distribution. The spreading is performed on the curved surface of the previously solidified layer. Secondly, the heat-melt-microstructure coupled non-isothermal phase-field simulations are performed to obtain the temporal and spatial evolution of melt, pore, grain boundary, grain distribution/orientation, etc., as well as the final polycrystal microstructure. Thirdly, crystal plasticity finite element method is utilized to attain the macroscopic mechanical response and stress/strain distribution of the additively manufactured polycrystal microstructure (AMPM) and FIP which is a surrogate measure for the driving force to form fatigue cracks. Fourthly, extreme value statistics are carried out to analyze the extreme value distribution of FIPs and the fatigue dispersity of the AMPM. Comprehensive simulations are put into practice for the selective laser melting based additive manufacturing of a typical metallic material 316L stainless steel. The simulation results indicate that the macroscopic yield stress of the AMPM is anisotropic and decreases with the increasing laser scanning velocity. The extreme value of FIPs from the AMPM with random distribution of grain orientations correlates well with the Gumbel extreme value distribution. The increase of laser scanning velocity could decrease the fatigue dispersity of the AMPM, but increase the FIP extremum and the associated driving force for fatigue crack initiation and thus notably decrease the fatigue life.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.