Abstract

Computational fluid dynamics (CFD) simulations were carried out for single-phase flow in a rotating cylinder electrode reactor (RCE) in a continuous operation mode. Velocity profiles and streamlines were obtained solving the Reynolds-averaged Navier-Stokes (RANS) equations with the k−ε turbulence model. Residence time distribution (RTD) was obtained solving the averaged diffusion-convection equation. Two configurations of RCE, varying the position of the electrolyte flow inlet and flow exit, were tested. Good agreement of simulations with experimental RTD was obtained. A constant rotational speed of 300rpm (peripheral velocity of 59.7cms−1, Re=22682) at the RCE surface was employed. Velocity profiles, streamlines, and RTD are obtained at different volumetric flow rates ranging from 0.1 to 0.8Lmin−1. The flow behavior shows the presence of recirculation zones, being less important for the configuration where the electrolyte inlet is situated at the bottom of the reactor, and the electrolyte outlet is set at the top of the reactor wall surface. The extent of recirculation zones increases with increasing flow rate.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.