Abstract
In this study, we investigated the behaviors of epoxy composites reinforced with bamboo (BF) and hemp (HF) fibers. Both fibers were treated using dielectric barrier discharge (DBD) plasma for various durations (2.5 to 20 min). Epoxy resin (ER) was mixed with BF or HF with and without plasma treatment. The Fourier-transform infrared spectra of the plasma-treated fibers showed an enhanced peak intensity of carboxyl groups. ER/BF treated for 20 min exhibited a high tensile strength (up to 56.5 MPa), while ER/HF treated for 20 min exhibited a more significant increase in elongation at break (6.4%). Flexural tests indicated that the plasma treatment significantly improved the flexural strength of the hemp composites (up to 62.2 MPa) compared to the bamboo composites. The plasma treatment increased the fiber surface roughness and interfacial bonding in both composites. The thermal stability and wettability were improved by the DBD plasma treatment. The DBD plasma treatment enhanced the interfacial adhesion between fibers and ER matrix, which improved the mechanical, thermal, and wettability properties of the composites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
