Abstract
To achieve the goal of zero emission in aviation, it is critical to advance electric aircraft technologies, especially in short to medium range flights. Superconducting fault current limiters (SFCLs) have shown promising potential in electric aircraft system as a protection solution to limit the peak of fault current. Many research works focused on the SFCL performance under low impedance faults, where the fault current is much higher than the nominal current and the SFCL will transit to normal (metal) state quickly. However, there are limited reports on investigating the SFCL reacting to high impedance faults for electric aircraft system, where the SFCL does not abruptly transit to normal state. In this paper, we built an electric-thermal coupled model in MATLAB which simulates the behaviour of a resistive type SFCL both under low and high impedance faults. We investigated three mathematical relations of local electric field E and local current density J representing the transition from superconducting state to normal state, both under high and low impedance fault. The three mathematical relations are classic E-J power-law, modified E-J power-law and two- stage E-J power law. The electric-thermal model of the SFCL incorporating all these three types of mathematical relations, respectively, have been used to calculate the SFCL responses under high and low impedance faults, and compared with each other, as well as testing results. The limited fault current, voltage drop, resistance and temperature variations in the SFCL are observed and analysed. The results have shown that the proposed SFCL model is able to accurately characterise a resistive type SFCL under both high impedance and low impedance fault.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.