Abstract
This work is concerned with the design and photovoltaic performance study of organic semiconducting materials-based solar cells using a SCAPS simulator. Organic solar cells are one form that absorbs light and produces electricity. They exhibit high power conversion efficiency, low manufacturing costs, lightweight, and flexibility which makes them a promising technology for renewable energy. We developed and designed organic solar cell devices with the structure ITO/PEDOT: PSS/P3HT: PCBM/PFN-Br/Al for bulk-heterojunction structure and ITO/PEDOT: PSS/P3HT: PCBM/PFN-Br/Al for bilayer structure where PEDOT: PSS and PFN-Br were used as hole and electron transporting layers (HTL and ETL) respectively. The short circuit current density versus voltage (J-V) characteristics as well as photovoltaic parameters namely open circuit voltage (VOC), short circuit current density (JSC), fill factor (FF), and power conversion efficiency (PCE) have been examined. In addition, the quantum efficiency (QE) of the two structures has been also studied. The effectiveness of the photovoltaic simulated systems has also been attempted to be enhanced by varying the absorber layer's thickness for both architectures. Later, this turned out that variations in the band gap of the absorber layer had an impact on the factors that determined how well solar cells performed. It has been found that the simulated bulk-heterojunction device exhibits 20.43% PCE whereas 3.52% PCE has been calculated from the simulated bilayer device.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call