Abstract

Batch adsorption experiments were carried out to evaluate the effect of type of crop residues and chemical pretreatment solutions on the removal efficiency of heavy metal ions at different concentrations of synthetic wastewater solutions. Rice straw, cotton stalks, and maize stalks were pretreated with different solutions (i.e., sulfuric acid, oxalic acid, sodium hydroxide, and distilled water as the control treatment) in order to increase their metal-binding capacity. Results indicated that cotton stalks were the best biosorbent material according to their efficiency in removal of heavy metal ions. Sodium hydroxide was the best chemical pretreatment method for stimulating the biosorption capacity of crop residues. Ions of Pb2+ had the highest biosorption ratio among all competitive ions, whereas Mn2+ ions had the lowest. The removal efficiency decreased as the concentration of heavy metal ions increased in aqueous solutions. Sorption equilibrium isotherms could be described by the Langmuir model in most cases, whereas an isotherm of S shape was observed in other cases, which did not follow the Langmuir isotherm model. In conclusion, cotton stalks pretreated with sodium hydroxide could be used as an efficient technique for wastewater remediation prior to irrigation due to its low-cost, little processing, and high biosorption capacity.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call