Abstract

In this paper, physical and electrical properties of TaN films used as metal electrodes in MOS structures are discussed. TaN films were deposited by MOCVD from commercial TBTDET and two novel mixed amido/imido/guanidinato and mixed amido/imido/hydrazido precursors. It will be shown that morphology (only films deposited from the guanidinato compound above 750 °C showed cubic TaN phase while all other films were amorphous) and O content (5 at.% and 25 at.% in case of guanidinato and in case of TBTDET precursor, respectively) do not necessary predetermine resistivity. Lowest resistivity (230 μΩ cm) was obtained for TBTDET. Evaluated values of metal work function are 4.4–4.6 eV (TBTDET) and 3.9 eV (guanidinato compound). Films deposited from the hydrazido compound reveal bad electrical properties (e.g., metal layers behave dielectric-like).

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.