Abstract
Both in-plane and through-thickness linear viscoelastic properties of the single-wall carbon nanotubes (SWNT)/polyelectrolyte multilayer nanocomposite film were characterized using nanoindentation. The SWNT nanocomposite films with a SWNT loading of 4.7% by weight was made by layer-by-layer assembly (LBL). The viscoelastic functions of materials were measured using two methods: (1) the direct differentiation method from the load–displacement data; and (2) the material parameter extraction method by fitting the analytical load–displacement relation to nanoindentation data. Results from both methods agree well. The in-plane Young's moduli of the films were also measured from small-scale tensile tests; the results agree well with nanoindentation data. This investigation indicates that the in-plane and through-thickness linear viscoelastic properties are almost identical for a SWNT nanocomposite made by LBL technique, despite the preferred orientation of the SWNT in a nanocomposite film.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.