Abstract

• Recommend the optimum healing moment of different asphalt mixtures suffering from moisture damage. • HEL and SRL are introduced to compare the self-healing properties of different asphalt mixtures. • There are three moisture damage and microwave healing modes of asphalt mixtures on pores. • Valid pores and invalid pores are proposed to characterize the internal pores of asphalt mixtures. • The self-healing properties and characterization of different asphalt mixtures are compared. Microwave heating technology could heal micro-cracks caused by freeze-thaw (F-T) cyclic damage. The main objectives were to recommend the optimum heating moment and evaluate the difference between two typical mixtures during F-T cycle and microwave heating based on microstructure. To this end, cyclic F-T split tests and microwave heating tests were conducted to determine the best heating moment. In addition, the internal structure was scanned using X-ray computed tomography and evaluated using digital image processing. The results indicated that the optimum timing to heal two different asphalt mixtures (AC-13 and OGFC-13) occurred when the degrees of moisture damage were 39.8% and 42.4%, respectively. AC-13 exhibited better heating uniformity, and OGFC-13 exhibited better heating transferring. Moreover, F-T damage and microwave heating could change the internal structure: three types of moisture damage were seen in the voids: pore generation, connections, and expansion; pore number, porosity, pore area, and equivalent diameter first increased after the F-T cycles and then decreased after microwave heating, but the effect for OGFC-13 was more obvious; The F-T cycles mainly increased the number of valid pores, and microwave healing mainly increased the number of invalid pores; The damage and healing process of AC-13 and OGFC-13 mainly occurred on the 0.15–1.18 mm and 0.15–4.75 mm pores. This research could contribute to maintenance cost savings and revelation of F-T damage and microwave healing mechanism.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.