Abstract
We successfully fabricated lithium titanate Li4Ti5O12 (LTO) thin film electrode at room temperature by aerosol deposition (AD) method. Agglomerated LTO powder with the size of 5–6 μm composed of primary sub-micron particles was used as raw material and deposited directly on a stainless steel substrate via room temperature impact consolidation (RTIC). X-ray diffraction patterns revealed that as-deposited LTO film has a same crystalline structure with raw powder and no secondary phases were formed during the deposition process. SEM observation showed that the film has porous structure consisted from LTO particles with the sizes of several 100 nm. As-deposited LTO film electrode showed good electrochemical property in liquid electrolyte. The discharge capacities of 159 mAh g−1 and 125 mAh g−1 were obtained at current density of 0.067 mA cm−2 (=0.5C rate) and 2.68 mA cm−2 (=20C rate). The former corresponds to 91% of theoretical capacity for LTO (=175 mAh g−1). The film electrode also showed good capacity retention, indicating that adhesion between the film and substrate are sufficiently strong.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
