Abstract
In this study we fabricated a silicon-based stamp with various microchannel arrays, and demonstrated successful replication of the stamp micro-structure on poly methyl methacrylate (PMMA) substrates. We used maskless UV lithography for the production of the micro-structured stamp. Thermal imprint lithography was used to fabricate microfeatured fluidic platforms on PMMA substrates, as well as to bond PMMA lids on the fluidic platforms. The microfeature in the silicon-based (silicon wafer coated with SU-8) stamp includes microchannel arrays of approximately 30 μm in depth and 5 mm in width. We produced various channels without pillars, as well as with SU-8 pillars in the range of 50–100 μm wide and 6 μm in height. PMMA discs of 1 mm thickness were utilized as the molding substrate. We found 10 kN applied force and 100 °C embossing temperature were optimum for transferring the micro-structure to the PMMA substrate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.