Behavior of Concrete Beam Encasing Castellated Steel Section with Different Opening Size

Abstract

This research aims to investigate the behavior of castellated steel sections with varying hole sizes enclosed in a concrete beam. Should two different opening size types (depth 140mm and depth 280mm) be used? When we use two types of shear connectors with full and partial interaction, stud connections integrate the steel and concrete parts. This research demonstrates We examined five simply-supported composite beams under two-point loading conditions. We constructed four examples using castellated steel beams and produced one specimen using standard steel beams as a control. We examine the maximum load support capacity. Examined are the specimens of composite beams' deformations. Among the many characteristics assessed are the castellated beam size of the aperture and the whole and partial composite interactions. According to test results, the sample had a 140mm hexagonal hole. The sample experienced an increase in final load percentages of approximately 11.11%. Compared to the sample featuring a 280mm hexagonal opening size, the mid-deflection and horizontal displacement showed a significant increase. The figures indicate a final load of approximately 18.82% and 16.7%, respectively. Full interaction also revealed a higher ultimate load for the sample with the same aperture. When the sample was fitted with a 140mm hexagonal hole, the percentages increased by approximately 6%. Additionally, the percentage of deflection at midspan and the percentage of horizontal displacement decreased by approximately 16.7% and 26.8%, respectively, compared to the sample with a hexagonal opening size of 280 mm.