Interaction of buckling modes in castellated steel beams

Abstract

This paper investigates the behaviour of normal and high strength castellated steel beams under combined lateral torsional and distortional buckling modes. An efficient nonlinear 3D finite element model has been developed for the analysis of the beams. The initial geometric imperfection and material nonlinearities were carefully considered in the analysis. The nonlinear finite element model was verified against tests on castellated beams having different lengths and different cross-sections. Failure loads and interaction of buckling modes as well as load–lateral deflection curves of castellated steel beams were investigated in this study. An extensive parametric study was carried out using the finite element model to study the effects of the change in cross-section geometries, beam length and steel strength on the strength and buckling behaviour of castellated steel beams. The parametric study has shown that the presence of web distortional buckling causes a considerable decrease in the failure load of slender castellated steel beams. It is also shown that the use of high strength steel offers a considerable increase in the failure loads of less slender castellated steel beams. The failure loads predicted from the finite element model were compared with that predicted from Australian Standards for steel beams under lateral torsional buckling. It is shown that the Specification predictions are generally conservative for normal strength castellated steel beams failing by lateral torsional buckling, unconservative for castellated steel beams failing by web distortional buckling and quite conservative for high strength castellated steel beams failing by lateral torsional buckling.