Abstract
Lime-based mortars containing pozzolanic additions of metakaolin, sepiolite and white Portland cement are studied in order to determine their performance as historic masonry conservation mortars. Hydration products on metakaolin–lime blended mortars include stable and metastable phases. The presence of such products has been studied by means of DTA and XRD analysis, concluding that the selection between them is mainly related with the water–lime ratio. Sepiolite addition to metakaolin–lime mortars has shown to inhibit C 4AH 13 formation. Therefore, the influence of phase distribution on the mechanical resistance is considered. Finally, compounds production on blended lime–white Portland cement was compared to natural hydraulic lime ones, and as a result, no remarkable differences appeared, apart from traces of possible cement Portland addition to the latter, usually not mentioned in the nominal composition supplied by the manufacturers of lime binders.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.