Abstract
The objective of this study was to evaluate pyrolysis and co-pyrolysis behavior of cellulose and poly(methyl methacrylate) (PMMA) and examine the kinetics of the processes by using thermogravimetric analysis (TGA) coupled with FT-IR spectrometry. For this purpose, non-isothermal experiments were carried out using different heating rates and three prominent iso-conversional methods were used to obtain kinetic parameters at various extents of conversions from 0.1 to 0.9. Blending PMMA with cellulose had a marked effect on the process. The results of co-pyrolysis using a blending ratio of 50 wt% PMMA indicated that the highest rate of pyrolytic transformation was achieved at a conversion degree of 0.5 while activation energy ranged from 188.1 to 364.3 kJ/mol. The most intensive gas release during cellulose pyrolysis was CO2. Co-pyrolysis was more complicated than that of pyrolysis of cellulose and PMMA due to depolymerization and radical interactions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.