Abstract
This study aimed to optimize the postharvest blanching and drying process of blueberries using high-humidity air impingement (HHAIB) and hot-air-assisted infrared (HAIR) heating. A novel pilot-scale hot-air-assisted carbon-fiber infrared (IR) blanching/drying system was developed. Fresh blueberries with an average diameter of 10~15 mm were first blanched with high-humidity air at 110 °C and 12 m/s velocity for different durations (30, 60, 90, and 120 s); subsequently, the preblanched blueberries were dried at different IR heating temperatures (50, 60, 70, 80, and 90 °C) and air velocities (0.01, 0.5, 1.5, and 2.5 m/s), following a factorial design. The drying time (DT), specific energy consumption (SEC), ascorbic acid content (VC), and rehydration capacity (RC) were determined as response variables. A three-layer feed-forward artificial neural network (ANN) model with a backpropagation algorithm was constructed to simulate the influence of blanching time, IR heating temperature, and air velocity on the four response variables by training on the experimental data. Objective functions for DT, SEC, VC, and RC that were developed by the ANN model were used for the simultaneous minimization of DT and SEC and maximization of VC and RC using a nondominated sorting genetic algorithm (NSGA II) to find the Pareto-optimal solutions. The optimal conditions were found to be 93 s of blanching, 89 °C IR heating, and a 1.2 m/s air velocity, which resulted in a drying time of 366.7 min, an SEC of 1.43 MJ/kg, a VC of 4.19 mg/100g, and an RC of 3.35. The predicted values from the ANN model agreed well with the experimental data under optimized conditions, with a low relative deviation value of 1.43-3.08%. The findings from this study provide guidance to improve the processing efficiency, product quality, and sustainability of blueberry postharvest processes. The ANN-assisted optimization approach developed in this study also sets a foundation for the smart control of processing systems of blueberries and similar commodities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.