Year-end Sale % OFF 
Abstract
Abstract In this paper, epoxy acrylate/nickel-plated carbon nanotubes composites with different structural orientations (X, Z) were prepared by digital light procession 3D, and the orientation of nickel-plated carbon nanotubes in the magnetic field and its effect on the mechanical properties of the composites were systematically studied. The scanning electron microscope shows the orientation of the fiber in the magnetic field. The experimental results show that the mechanical properties and friction coefficient of the material show obvious anisotropy, but the anisotropy of wear rate is not obvious. The tensile strength of the X sample is about 18% higher than that of the Z sample when the content of nickel-plated carbon nanotubes was 0.15 wt%. The impact strength of the X sample is about 15% higher than that of the Z sample when the content of Ni-MWNTs was 0.1 wt%. The friction coefficient on the plane (X, Y) is about 20% lower than that on the plane (Y, Z) when the content of carbon nanotubes is 0.05 wt%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
