Abstract
Among the most commonly used materials in the construction of structures in the last two centuries are iron and steel. Clamp joints are a suitable type of joint when it is necessary to rehabilitate or modify a historical steel structure for new uses, reinforcing or modifying it with new beams, without the need to drill or weld on the original structure. The clamps allow beams to be joined with a flange (such as I-beams) without the need for any prior operation on the beams and allow the manufacture of completely removable and reconfigurable structures. Developing and analysing this type of fully removable and reconfigurable structure is necessary. To date, no studies have been carried out on the fatigue behaviour of steel joints by clamps, especially taking into account their main geometric characteristics, such as the size of the clamp levers. In this work, an analytical model is proposed that allows for the analysis of the number of cycles and the fatigue limit of clamp joints as a function of the size of the clamp levers. In addition, various fatigue tests are performed with different clamp sizes. The experimental results are compared with those obtained with the proposed methodology. Finally, the relationships between the lever length and the fatigue behaviour of the clamp joints have been determined. It is concluded that an increase in the size of the front lever is associated to a decrease in the fatigue limit. On the contrary, if the size of the rear lever is increased, the fatigue limit of the joint increases. In general, according to the obtained results, the resistance of the joint can be reduced to approximately one third when it is subjected to fatigue loads.
Highlights
There are a large number of steel structures around the world that are still in service or whose rehabilitation for new uses is planned
According to the analytical model proposed in this work, analysis of the load cycles and fatigue limit of a clamp joint was performed for different geometric values of the clamp lever and with M10 bolt size
This shows how the number of cycles achieved before fatigue failure for a fixed load decreases shows how the number of cycles achieved before fatigue failure for a fixed load decreases as the front clamp lever is increased
Summary
There are a large number of steel structures around the world that are still in service or whose rehabilitation for new uses is planned. Analysis the number of cycles and the fatigue limitfatigue of clamped joints and their bolts, as a work of Yan et al [21], a test andanalytical finite element analysis of a it new type ofto function of in thethe size of the clamping levers. This model will make possible double-limb double-plate connection joint of in joint.
Sign-in/Register to view highlights & summary 
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call