Abstract
We present a detailed analysis of the photo-current potentials and losses in thin film crystalline silicon solar cells on glass. The effects of texturing the silicon backside, applying a diffuse back reflector and a textured anti-reflection foil were analysed. Light beam induced current measurements were used to determine the losses due to local effects like the absorber contact, cracks in the absorber and grain boundaries. Detailed loss analysis in combination with ray-tracing simulations showed that the maximum light trapping potential imposed by geometrical optics has nearly been achieved. The photocurrent losses due to incomplete carrier collection and parasitic absorption were accounted for using a theoretical model. For the investigated, textured, n-doped cell with reflector and anti-reflection foil, the short circuit current density (JSC) was 28.9mA/cm2 and the main loss factors were direct reflection (3.4mA/cm2), electrical shading effects due to the absorber contact (3.1mA/cm2) and incomplete carrier collection due to surface/bulk recombination (1.6mA/cm2). Using the presented light trapping scheme we obtained the following efficiencies: 11.8% for a p-doped and 12.1% for an n-doped crystalline silicon absorber. Finally, the potentials for efficiencies beyond 14% are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.