Analysis of electrical and hysteresis characteristics of flexible OTFT using solution-processable DPP-DTT polymer and Parylene-C

Abstract

Organic thin-film transistors (OTFTs) fabricated on Parylene-C substrates have the advantages of a simple process, low cost, and flexible characteristics. This study introduces the manufacturing method and electrical characteristics of an OTFT using organic materials as the substrate, gate dielectric, and channel material. PDPP2T-TT-OD(DPP-DTT) is used as the channel material, which is a highly mobile p-type polymer with good air stability. The proposed OTFT device has flexible characteristics because it is fabricated on a Parylene-C substrate and can be used even in a curved state. Furthermore, the manufacturing process was largely achieved via a simple, low-cost solution process using spin-coating and photolithography with a photo-curable material. Under flat conditions, the threshold voltage (VTH) is approximately –3 V, the average ION/IOFF ratio is approximately 105, and the mobility is 0.84 cm2/Vs.