Anaerobic filter reactor performance for the treatment of complex dairy wastewater at industrial scale

Abstract

The wastewaters discharged by raw milk quality control laboratories are more complex than the ones commonly generated by dairy factories because of the presence of certain chemicals such as sodium azide or chloramphenicol, which are used for preserving milk before analysis. The treatment of these effluents has been carried out in a full-scale plant comprising a 12 m 3 anaerobic filter (AF) reactor and a 28 m 3 sequential batch reactor (SBR). After more than 2 years of operation, a successful anaerobic treatment of these effluents was achieved, without fat removal prior to the anaerobic reactor. The organic loading rates maintained in the AF reactor were 5–6 kg COD/m 3 d, with COD removal being higher than 90%. No biomass washout was observed, and most of the fat contained in the wastewaters was successfully degraded. The addition of alkalinity is crucial for the maintenance of a proper buffer medium to ensure pH stability. The effluent of the AF reactor was successfully treated in the SBR reactor, and a final effluent with a COD content below 200 mg/l and total nitrogen below 10 mg N/l was obtained.