Abstract

This article presents a multiband low-power and low-complexity impulse radio ultrawideband (IR-UWB) noncoherent receiver. The proposed receiver can be digitally reconfigured in three different modes of operation, including two single-band modes and one concurrent dual-band mode. In the two single-band modes, the proposed envelope detection architecture is capable of receiving and demodulating an on–off keying (OOK) pulse stream at RF center frequencies of 2.8 or 4.8 GHz. In the concurrent dual-band mode, the proposed architecture is able to demodulate binary frequency-shift keying (FSK), in addition to OOK demodulation, at center frequencies of 3 and 5 GHz. The receiver is composed of a reconfigurable low-power differential low noise amplifier (LNA), a fully differential squarer (self-mixer circuit), low-pass filter (LPF), and variable gain baseband (BB) amplifiers. The receiver is fabricated in TSMC 130-nm CMOS process technology. The receiver can operate at up to 150 Mb/s with the ternary signaling that is enabled by the binary FSK modulation combined with the OOK modulation in concurrent dual-band mode. At its maximum gain, the receiver achieves a sensitivity of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$-$</tex-math> </inline-formula> 72 dBm at a bit error rate (BER) of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$10^{-3}$</tex-math> </inline-formula> at a 100-Mb/s data rate. It consumes 11.9 and 13.2 mW from a 1.2-V supply in the single-band modes and concurrent dual-band mode, respectively.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.