An Experimental Study on the Frictional Property and Long-Term Performance of GT/HDPE Composites

Abstract

This paper is concerned with the long-term performance of geo-textile (GT) composites in terms of creep deformation and frictional properties. Composites of PVA GT and HDPE GM were made to investigate the advanced properties of long-term performance related to waste landfill applications. The same experiments were also performed for typical polypropylene and polyester GT and compared to PVA GT/HDPE GM composites. The main purpose of this study is to develop high performance GT composites with GM by using PVA GT which is capable of improving frictional property and thus enhances long-term performance of GT composites. In the present experiments, GT composites of PVA GT/HDPE GM, PVA GT of 600, 1000, 1500, 2000g/m2 and HDPE GM were prepared in thermal bonding process. Polyester and polypropylene GT were also made in needle punching process. The creep deformation of GT composites was measured and evaluated in accordance with ASTM D5262. Frictional characteristics of GT composites tested in this study were conducted with compact direct shear apparatus in accordance with ASTM D5321. It was concluded from the present experimental study that friction coefficient of GT composites is relatively large compared with those of polyester and polypropylene non-woven GT as long as the friction media has similar size to the particles of domestic standard earth. In the event that 20% of the maximum tensile strength was added to polypropylene and polyester non-woven geo-textiles, creep deformation reached to 10% or higher, making it even impossible to find reduction factor.