Physical and Morphological Characterisation of Typha Australis Fibres

Abstract

Typha australis is an invasive plant from Senegal also found in wetlands. In order to limit its proliferation, typha australis is used in the energy sector but also in construction. This study contributes to the valorisation of typha australis in the field of biocomposites. For this purpose, typha fibres were used. The fibres were extracted manually using a plastic comb, then subdivided into three zones, namely the bottom, middle and top, and dried. The resulting fibres were characterised physically by measuring density, water content and absorption coefficient, and morphologically by determining the morphology but also of the section of the fibres. many respects, the physical property results concerning density show an average of the three areas of 1.53 g/cm3 with a water content between 6 and 10% and an absorption coefficient showing two main absorption phases. As for the tomography results, we directly notice the presence of fibre bundles and not of individual fibres due to the manual extraction method used. Nevertheless, the results obtained suggest a behaviour comparable to that of the most commonly used natural fibres, namely flax.