Abstract
Abstract Spelt is one of unprofitable wheat types and requires an additional hulling process, in which the husks are removed from the grain. A device for dehulling spelt kernels was proposed. The described solution consists of a stainless-steel wire mesh cylinder with 4×20 mm and 4×30 mm longitudinal openings and a rotor with adjustable blade angles. Kernels were dehulled at the following angular speeds of the shaft: 16.76, 23.04, 29.32, 35.60, and 41.89 rad·s−1, and the following rotor blade angles: 50°, 60°, 70°, 80°, and 90°. The efficiency of glume and glumelle removal, the proportion of damaged kernels, and kernel and husk separation efficiency were evaluated during the experiment. The highest of kernel separation efficiency η z was 81.86% using a wire mesh cylinder with 4×30 mm longitudinal openings and 81.60% for a wire mesh cylinder with 4×20 mm longitudinal openings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.