Abstract

Vertical axis wind turbines (VAWTs) are gradually receiving more and more interest due to their lower sensitivity to the yawed wind direction. Compared with straight blades VAWT, blades with a certain helicity show a better aerodynamic performance and less noise emission. Nowadays computational fluid dynamics technology is frequently applied to VAWTs and gives results that can reflect real flow phenomena. In this paper, a 2D flow field simulation of a helical vertical axis wind turbine (HVAWT) with four blades has been carried out by means of a large eddy simulation (LES). The power output and fluctuation at each azimuthal position are studied with different tip speed ratio (TSR). The result shows that the variation of angle of attack (AOA) and blade-wake interaction under different TSR conditions are the two main reasons for the effects of TSR on power output. Furthermore, in order to understand the characteristics of the HVAWT along the spanwise direction, the 3D full size flow field has also been studied by the means of unsteady Reynold Averaged Navier-Stokes (U-RANS) and 3D effects on the turbine performance can be observed by the spanwise pressure distribution. It shows that tip vortex near blade tips and second flow in the spanwise direction also play a major role on the performance of VAWTs.

Highlights

  • Due to severe fossil fuel shortages and global warming issues, wind energy is attracting more and more interest as an environmentally friendly and clean energy source

  • The results showed that wind velocity oscillation was the main cause of the power loss observed on a turbine with non-twisted blades compared with a helical vertical axis wind turbine (HVAWT)

  • The black and red lines represent the results of the 2D unsteady Reynold Averaged Navier-Stokes (U-RANS) and large eddy simulation (LES) simulation, respectively

Read more

Summary

Introduction

Due to severe fossil fuel shortages and global warming issues, wind energy is attracting more and more interest as an environmentally friendly and clean energy source. The turbines used in wind energy conversion systems can be classified into two groups: horizontal-axis wind turbines (HAWTs) and vertical-axis wind turbines (VAWTs). The stream-tube model is one of the methods which is always considered as the pioneer in predicting the overall aerodynamic performance of a VAWT [2]. Though the model has been improved to give the multiple stream-tube model [3], it still fails to handle transient simulations at high blade loading and under high Reynolds number conditions. Another method is the panel method, Energies 2017, 10, 575; doi:10.3390/en10040575 www.mdpi.com/journal/energies

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call