Activity, Selectivity and Initial Degradation of Iron Molybdate in the Oxidative Dehydrogenation of Ethanol

Abstract

Listen

Translate article

AbstractIron molybdate catalysts are applied in the industrial FormOx process to produce formaldehyde by oxidative dehydrogenation (ODH) of methanol. Only few studies are available about the applicability of iron molybdate catalysts for the ODH of ethanol to produce acetaldehyde. Herein, an iron molybdate synthesized by co‐precipitation (p) and an iron molybdate prepared by a ball‐milling solid‐state synthesis (bm) are applied as ethanol ODH catalysts. Both materials show attractive acetaldehyde selectivites of >90 % (280 °C: p‐Fe2(MoO4)3: YAcH=90.3 %; bm‐Fe2(MoO4)3: YAcH=60.4 %) and a stable performance. The bulk composition and crystal structure could be confirmed by various characterization techniques and is maintained during ethanol ODH. XPS reveals an enrichment of Mo on the catalyst surface which is slightly decreasing after the catalytic tests. This observation could be a first sign of long‐term deactivation like known from methanol ODH. Comparing the performance of both materials, p‐Fe2(MoO4)3 shows higher activity and aldehyde selectivity. We propose the higher Mo/Fe surface ratio and the lower acidity to be the reasons for these differences.