A study of the hydrogen-induced degradation of two steels differing in sulfur content

Abstract

Two steels with different sulfur contents: 0.003 and 0.024 wt pct, were cathodically charged under three different conditions and brought to fracture in tension immediately after charging or after aging at room temperature. All hydrogen charged specimens showed embrittlement, with a little higher loss of ductility in the high sulfur steel. The hydrogen embrittlement was reversible in both steels when specimens were charged in arsenic-free sulfuric acid solution at room temperature but was irreversible when charged in arsenic-containing acid at the same temperature. After charging in molten salts at 200 °C, some of the low sulfur steel specimens exhibited irreversible hydrogen damage with the appearance of quasicleavage fractures, while all high sulfur steel specimens were restored to the uncharged ductility by aging at room temperature. These results are interpreted by assuming that an increased sulfur content in steel increases the density of trapping sites for hydrogen at the sulfide/matrix interfaces. These traps are inactive above 150 °C and become operative after cooling. Therefore, at the same hydrogen content in steel after cooling, the greater content of sulfur results in a decreased activity of the lattice dissolved hydrogen, hence in reduced embrittlement.