Abstract
The synchrotron-based small-angle X-ray scattering (SAXS) technique was used to investigate the shear-induced crystallization kinetics of branched/unbranched poly(ethylene terephthalate) (PET). Reactive extrusion of bottle-grade PET with the branching and chain-extension agents pyromellitic dianhydride and pentaerythritol results in enhanced rheological properties, such as higher melt strength and higher viscosity. In this study, six samples of PET were investigated: linear PET [intrinsic viscosity (IV) ≃ 0.76 dm3 g−1]; four branched PETs produced from linear PET by a reactive extrusion technique (IV ≃ 0.86–1.06 dm3 g−1); and a control PET (IV ≃ 0.73 dm3 g−1) extruded under the same conditions without reactive agents. SAXS data were recorded for the PET at the melt temperature and time-resolved SAXS data were recorded following the application of a step shear (53 s−1 for 2 s). As the PET IV was increased, the extent of shear-induced orientation increased, whilst the time taken for the polymer to initiate and complete crystallization decreased.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
