Abstract
An output-capacitorless low-dropout regulator (LDO) based on an evolved versions of flipped voltage follower (FVF) has been proposed and simulated in a commercial 0.18µm CMOS process in this paper. To get over the tradeoff between power consumption against other important design parameters such as loop stability and fast response, the proposed LDO is based on FVF with a push-pull stage and adopts adaptive power transistors technique, which transforms the regulator between two-stage and three-stage amplifier for different load currents. Based on such topology, more measurements are utilized to further reduce transient overshoot and improve load regulation. Simulation results verify that the recovery time is as short as 1.3μs and the maximum undershoot and overshoot are as low as 39mV and 42mV, respectively. In addition, due to the adaptive power transistors technique, the quiescent current is only 16.6μA when the load current is light. Besides, excellent load regulation is obtained as 2.7μV/mA.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.