Abstract

Large grained polycrystalline silicon (poly-Si) absorbers were realized by electron beam induced liquid phase crystallization on 2 μm periodically patterned glass substrates and processed into a-Si:H/poly-Si heterojunction thin-film solar cells. The substrates were structured by nanoimprint lithography using a UV curable hybrid polymer sol-gel resist, resulting in a glassy high-temperature stable micro-structured surface. Structural analysis yielded high quality poly-Si material with grain sizes up to several hundred micrometers. An increase of absorption and an enhancement of the external quantum efficiency in the NIR as a consequence of light trapping due to the micro-structured poly-Si/substrate interface were observed. Up to now, only moderate solar cell parameters, a maximum open-circuit voltage of 413 mV and a short-circuit current density of 8 mA cm<sup>-2</sup>, were measured being significantly lower to what can be achieved with liquid phase crystallized poly-Si thin-film solar cells on planar glass substrates indicating that the substrate texture has impact on the electrical material quality. By reduction of the SiC interlayer thickness at the micro-structured poly- Si/substrate interface defect-related parasitic absorption was considerably minimized. This encourages the implementation of nanoimprinted tailored substrate textures for light trapping in liquid phase crystallized poly-Si thinfilm solar cells.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.