A Novel Current Density Based Design Approach of Low-Noise Amplifiers

Abstract

The input-referred noise (IRN) is one of the most crucial performance indicators for the analog front-end (AFE) of neural recording devices. In this study, we present a novel design approach for a low-noise amplifier (LNA) based on the transistor optimization method in CMOS technology. Because flicker noise is predominant in neural recording applications, AFE has been designed to meet input-referred flicker noise specifications, whereas thermal noise contributions are monitored and controlled by flicker noise corner frequencies. Transistor optimization is accomplished using a lookup table that encapsulates its performance based on its current density. Initially, transistors are optimized based on the flicker noise performance; later, they may be further optimized based on their size, power consumption, transconductance, or thermal noise contribution. The proposed approach was validated by designing a folded-cascode amplifier with IRN ranging from 2 to 8 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{V}_{\text {rms}}$ </tex-math></inline-formula> . The results of the simulation show that the errors of our design methodology are less than 10%, which is less than those of the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$g_{m}/I_{D} $ </tex-math></inline-formula> and inversion coefficient methods. The proposed LNA achieves 2.1 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{V}_{\text {rms}}$ </tex-math></inline-formula> while consuming 0.83 <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$\mu \text{W}$ </tex-math></inline-formula> from a 1.2 V supply.