Abstract
ABSTRACTIn this work, in-situ doped polysilicon and poly-SiGe films have been used as the gate material for the fabrication of MOS devices to evaluate their respective performances. These films were deposited in an RTCVD system using a Si2H6 and GeH4 gas mixture. MOS capacitors with 45 Å thick gate oxides and polysilicon/poly-SiGe gates were subjected to different anneals to study boron penetration. SIMS analysis and flat band voltage measurements showed much lower boron penetration for devices with poly-SiGe gates than for devices with polysilicon gates. In addition, C-V measurements showed no poly depletion effects for poly-SiGe gates while polysilicon gates had a depletion effect of about 8%. A comparison of resistivities of these films showed a low resistivity of 1 mΩ-cm for poly-SiGe films versus 3 mΩ-cm for polysilicon films after an anneal at 950 °C for 30 seconds.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
