Abstract
Hybrid Laser-arc welding (HLAW) and laser beam welding (LBW) of HG785D steel were investigated by comparing microstructure, mechanical properties and heat source melting efficiency. Same microstructure of lath martensite (LM) was observed in fusion zone (FZ) of the two welded joints. However, coarser grain size and more random crystallographic orientations of FZ in HLAW joint were investigated via electron back-scatter diffraction (EBSD) analysis. M-A constituent and equiaxed ferrite (EF) were observed in finer-grain HAZ of HLAW joint, whereas fine martensite was obtained in LBW joint. More M-A constituent and granular bainite (GB) appeared in coarse-grain HAZ of HLAW joint. Higher heat input and lower cooling rate of HLAW compared to LBW resulted in presence of different microstructure. All the tensile specimen in both cases fractured at the base metal, while distinct difference in microhardness and low-temperature impact property was observed. Lower microhardness and higher impact energy of fusion zone were obtained in HLAW joint. Moreover, heat source melting efficiency of HLAW for 6-mm-thick HG785D steel plate could be improved by 26% compared to LBW.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
