Abstract
The fusion welding of molybdenum (Mo) and copper (Cu) is challenging task due to significant differences between chemical composition and physical properties of the two metals. A sound quality laser beam welding (LBW) joint between Mo and Cu is developed through the addition of pure Ni as an interlayer and laser beam offsetting. The evolution of microstructure in weld zone (WZ) and its impact on joint performance is analyzed through scanning electron microscope (SEM), energy dispersive spectrometer (EDS), electron backscattered diffraction (EBSD), tensile and hardness test. At room temperature, the LBW joint between Mo and Cu is ruptured from heat affect zone (HAZ) near fusion zone (FZ) under a tensile load of 209 MPa. The addition of Ni as interlayer between LBW joint of Mo and Cu contributed an increase of 37.79% in tensile strength and the joint is ruptured from HAZ beside the base material Cu. Such improvement in joint performance is attributed to grain refinement in FZ, coarsening of transition zone (TZ) between Mo and Cu and directional solidification towards Cu rich region in FZ due to addition of Ni into LBW joint between Mo and Cu. The research results provide reference for the welding between dissimilar materials with significantly different melting points.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Refractory Metals and Hard Materials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.