Abstract
Radiation-induced soft errors are a major reliability concern for memories. To ensure that memory contents are not corrupted, single error correction double error detection (SEC-DED) codes are commonly used, however, in advanced technology nodes, soft errors frequently affect more than one memory bit. Since SEC-DED codes cannot correct multiple errors, they are often combined with interleaving. Interleaving, however, impacts memory design and performance and cannot always be used in small memories. This limitation has spurred interest in codes that can correct adjacent bit errors. In particular, several SEC-DED double adjacent error correction (SEC-DED-DAEC) codes have recently been proposed. Implementing DAEC has a cost as it impacts the decoder complexity and delay. Another issue is that most of the new SEC-DED-DAEC codes miscorrect some double nonadjacent bit errors. In this brief, a new class of SEC-DED-DAEC codes is derived from orthogonal latin squares codes. The new codes significantly reduce the decoding complexity and delay. In addition, the codes do not miscorrect any double nonadjacent bit errors. The main disadvantage of the new codes is that they require a larger number of parity check bits. Therefore, they can be useful when decoding delay or complexity is critical or when miscorrection of double nonadjacent bit errors is not acceptable. The proposed codes have been implemented in Hardware Description Language and compared with some of the existing SEC-DED-DAEC codes. The results confirm the reduction in decoder delay.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.