Abstract
This brief presents a 54–68 GHz two-stage power amplifier (PA) with linearity and efficiency enhancement in a 40 nm CMOS process. The first stage adopts a current reuse cascaded common-source (CS) structure with a shunt RC feedback to maximize the gain and minimize the DC power consumption to boost the linearity and efficiency, while the second stage is a cascode structure with two built-in linearizers to enhance the linearity much further. Based on the proposed structure, the fabricated PA exhibits measured output of 1-dB compression point, saturated output power, power added efficiency (PAE) and AM-PM distortion of +14 dBm, +15 dBm, 20% and 8 degrees, respectively. In addition, the proposed CMOS PA achieves high and flat power gain of 14 dB with ripple less than 1.5 dB through the operating 54—68 GHz frequency band while consuming only 110 mW.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Circuits and Systems II: Express Briefs
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
