Abstract
A voltage reference with low Temperature coefficient (TC) and three outputs, which is compatible with high Power supply rejection ratio (PSRR) and low power consumption, is presented in this paper. The proposed reference circuit operating with all transistors biased in subthreshold region, provides three reference voltages of 340mV, 680mV, and 1020mV. Subthreshold MOSFET design allows the circuit to work with minimum current consumption of 7.4nA at the supply voltage 1.2V. The mean line sensitivity is 1.7%/V under a supply voltages ranging from 1.2 to 3V. The Power supply rejection ratio (PSRR) of 340mV output voltage simulated at 100Hz and 10MHz is over than 51.9dB and 120.4dB, respectively. Monte Carlo simulation shows a mean TC is 3.9ppm/ ◦ C with a standard deviation of 1ppm/ ◦ C over a set of 500 samples, in a temperature range from –30 ◦ C to 100 ◦ C. The active area of the presented voltage reference is 0.003mm2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.