Abstract
This article explores a single-source UXE-type asymmetrical multilevel inverter for its operation on 13-, 11-, and 9-levels with boosted output voltage. The 13- and 11-level operations require a single voltage sensor to maintain the auxiliary dc link at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$V_{\text{dc}}/2$</tex-math></inline-formula> and produce 1.5 and 1.25 boosting using redundant states and exhibit lower capacitor inrush currents. For the 9-level operation, the topology exhibits self-balancing of the dc-link at <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$V_{\text{dc}}$</tex-math></inline-formula> and a boosting of 2. With a conventional pulsewidth modulation (PWM) for the 13-level operation, the inverter can drive a predominantly inductive load of 0.35 lagging at unity modulation index. For the 11-level operation, the levels cease to maintain beyond the modulation of 0.95. Thus, a hybrid PWM is proposed to fully utilize the redundant states for the charging of the switched-capacitors and enhance the inverter active load capability in the 13-level mode by 21% at unity modulation index ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$m_a$</tex-math></inline-formula> ) and address a 0.8 power factor load at the <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$m_a$</tex-math></inline-formula> of 0.9. For the 11-level operation, the levels are maintained at any <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"><tex-math notation="LaTeX">$m_a$</tex-math></inline-formula> with the hybrid PWM. The operation of the inverter is also verified for nonlinear load. Further, the 9-level operation with twice boosting and self-balancing is presented. The results are verified on MATLAB/Simulink and validated experimentally.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have